For yacht crew, teak deck care is part of the daily rhythm onboard. Whether the yacht is guest-ready, underway, in the shipyard, or between trips, the deck diligently needs to be maintained properly.
Even with routine cleaning, certain areas can develop visible mold and mildew staining on teak decks. Swim platforms, tender access points, shaded side decks, covered walkways, corners with limited drainage, and hardware areas are common trouble spots.
When staining appears, scrubbing harder is not always the answer. Bleach and harsh chemicals are not the best answer either and not to mention restricted from being allowed into the waterways.
For visible mold and mildew staining, Teakdecking Systems (TDS) formulated ECO-PRO Mold & Mildew Stain Remover as part of the TDS ECO Deck Care System.
Why Bleach and Harsh Chemicals Are Not Ideal for Teak Decks
Bleach and harsh cleaners may seem like a fast solution, but they do not actually work fully and can create bigger problems over time. On teak decks, harsh chemicals can discolor the wood, dry out the surface, roughen the grain, and contribute to unnecessary wear. And there is a good chance that bleach and harsh chemical cleaners will affect caulking, nearby paint, stainless, fabrics, and other marine surfaces.
There is also the environmental and health side to consider. Yacht decks are cleaned in marinas, shipyards, anchorages, and coastal waters where runoff matters. Products with bleach, phosphates, caustic ingredients, or harsh chemicals DO NOT align with responsible yacht maintenance practices and are increasingly forbidden in many marinas worldwide. Products used for caring and maintain the look and performance of the deck need to be both safe for the applicant’s crew as well as the environment.
The goal is not just to make staining disappear. The goal is to care for the deck in a way that is safe for guests and crew and supports appearance, performance, efficiency, and environmental responsibility.
Why ECO-PRO Is Different
ECO-PRO Mold & Mildew Stain Remover is a plant-based, pH-neutral concentrate formulated by Teakdecking Systems for professional marine deck care.
ECO-PRO removes visible mold and mildew staining from teak and other marine surfaces when used as directed. It is designed for crew who need an effective, efficient and as an added bonus, an environmentally safe option.
Because ECO-PRO is a concentrate, it is also cost-effective onboard. One 32 oz quart can make up to eight gallons of ready-to-use solution when mixed at the standard 4 oz per gallon ratio. For heavier staining, the mixture can be increased to 6 oz per gallon according to label directions.
ECO-PRO can also be useful as preventative care before a shipyard period, extended downtime, or periods when parts of the deck may stay shaded, damp, or less ventilated. When used as directed, it helps support ongoing care against recurring visible mold and mildew staining as well as helping to eliminate musty odors.
Learn more about ECO-PRO Mold & Mildew Stain Remover.
Key Benefits
ECO-PRO gives crew a practical way to address one of the most common deck care issues without overcomplicating the maintenance routine.
Key benefits include:
- Natural Plant-based, pH-neutral formula
- Environmentally safe and non-toxic deck care option
- Removes visible mold and mildew staining and eliminates odors
- Concentrated formula for better value onboard
- One quart makes up to eight gallons of ready-to-use solution
- Suitable for teak and other marine surfaces
- Helpful for pre and post care before yard periods
How to Use ECO-PRO
Always follow label directions, but the process is simple. For standard use, mix 4 oz of ECO-PRO concentrate with 1 gallon of fresh water. For heavier staining, mix 6 oz of ECO PRO concentrate with 1 gallon of fresh water.
Basic steps:
- Mix ECO-PRO with fresh water according to label directions.
- Apply evenly to a dry surface under 130°F using a sprayer, brush, or pour-on application. If the surface temp is above 130F, simply apply some water bring the surface temperature down.
- Allow the product to dwell briefly (3-5minutes) while keeping the surface moist. 4. Scrub with a deck brush.
- Rinse thoroughly with fresh water.
- Allow the surface to dry.
Always follow marina, shipyard, and local environmental guidelines.
Where ECO-PRO Fits in the TDS ECO Deck Care System
ECO-PRO is part of the TDS ECO Deck Care System, along with ECO-100 Teak Cleaner Powder and ECO-300 Teak Cleaner Liquid. ECO-PRO can be applied anytime within your
cleaning protocol, however after any sandout ECO-PRO is advised to be applied as the first step in the Deck Care protocol.
- ECO-PRO removes visible mold and mildew staining, algae staining, grease, oil, food stains, animal stains, and other common onboard staining from teak and marine surfaces when used as directed.
- ECO-100 supports routine teak deck cleaning.
- ECO-300 brightens and cleans teak.
Explore
Key Takeaways
For yacht crew dealing with mold and mildew staining on teak decks, ECO-PRO is the Teakdecking Systems product formulated for that job.
It is plant-based, pH-neutral, environmentally safe, Non-Toxic, cost-effective as a concentrate, and simple to use. Use ECO-PRO for visible mold and mildew staining, algae staining, grease, oil, food stains, animal stains, and other common onboard staining on teak and marine surfaces. Use ECO-100 for routine teak deck cleaning. Use ECO-300 to brighten and clean teak before those big parties.
For more guidance, visit ECO-PRO Mold & Mildew Stain Remover or contact Teakdecking Systems
FAQs
What should yacht crew use for mold and mildew staining on teak decks?
Yacht crew can use ECO-PRO Mold & Mildew Stain Remover from Teakdecking Systems to remove visible mold and mildew staining and organic stains and odors from decks.
Why should yacht crew avoid bleach on teak decks?
Bleach and harsh chemicals can discolor teak, dry out the surface, roughen the grain, contribute to unnecessary wear, and create runoff concerns in marine environments. Additionally, bleaches and caustic acids are not safe for crew or waterways.
How do you mix ECO-PRO?
For standard use, mix 4 oz of ECO-PRO concentrate with 1 gallon of fresh water. For heavier staining, mix 6 oz with 1 gallon of fresh water. Always follow label directions. Make sure to apply on surfaces below 130F. If you are not sure of the temperature simply apply water to the surface to cool it down before applying ECO-PRO.
Is ECO-PRO cost-effective?
Yes. ECO-PRO is a concentrate. One 32 oz quart can make up to eight gallons of ready-to use solution when mixed at the standard 4 oz per gallon ratio.
Can ECO-PRO be used before a shipyard period?
Yes. ECO-PRO can be useful as preventative care before a shipyard period, extended downtime, or periods when parts of the deck may be shaded, damp, or less ventilated.
Is ECO-PRO environmentally safe?
ECO-PRO is an all-natural plant-based, non-toxic, pH-neutral concentrate formulated for professional marine deck care. It is designed as an environmentally safe option when used as directed.
